MacDon M200 Manual do Operador descarregar pdf (Página 131)

MAINTENANCE AND SERVICING

Form 169017 / 169087 / 169095 129 Revision C

7.7.4.2 Steering Chain Tension

DANGER

Stop engine and remove key from ignition

before leaving Operator’s seat for any reason.

A child or even a pet could engage an idling

machine.

a. Check steering for binding or excessive play which

may be the result of the steering chain being too

tight or too loose.

If the chain tension requires adjustment, proceed

as follows:

b. Swivel the Operator’s station to position steering

column close to the door.

c. At the base of the steering column, check

dimension “X” at spring (H). It should be 0.625

inches (16 mm).

d. Adjust dimension “X” as follows:

1. Loosen nut (J), and turn nut (K) to achieve

0.625 inches (16 mm) dimension.

2. Tighten nut (J), against nut (K) to secure

position.

3. Check that steering chain is taut, and steering

shaft is free to rotate.

0.625 in.

(

16 mm

)

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 233 234

Sem comentários

MacDon M200 Manual do Operador Página 131